Membrane Rack Aerator

Mobile aeration solution for aerating highly polluted waste water in industry or sewage treatment.

The Membrane Rack Aerator is a Plug & Play aerator that can be rapidly deployed for aeration of highly contaminated water. The aerator can aerate both continuous and intermittent. The rack can be easily deployed in existing water systems, there is no installation required. The Rack keeps stable on the ground due to it’s own weight. Very easy to transport and to connect. The rack consists of 20 PU diffusers with high chemical resistance, the frame is made of PE.

Features

+ Low investment
+ Low maintenance
+ Long life
+ High efficiency (5.5 kg O2 per kWh)
+ Flexible capacity (flow rate: 10-150 m3 / h)
+ Easy installation
+ Easy to transport (pallet size)

The high efficiency is due to the elasticity, advanced perforation pattern and low pressure loss of the PU membranes. The pressure drop (pressure loss) is about 30 Mbar at a flow rate of 10 m3 / h and 65 Mbar at a flow rate of 100 m3 / h per diffuser. The oxygen transfer efficiency at these values are resp. 5.5 and 3.7 kg O2 / kWh. The oxygen transfer capacity ranges from 1 to 9 kg O2 per hour. The flow rate can be adjusted in normal use between 30 and 80 m3 / h. The rack has a lower limit of 10 m3 / h and the upper limit is 150 m3 / h.

Applications

• Intermittent aeration
• Oxygen transfer
• Mixing
• Degassing
• In chemically contaminated water
• In Industrial water treatment In WWTP

Specifications

Type diffuser: PU membrane, PE tube 65 x 600 mm
Number of diffusers: 20 pieces
Frame: PE
Minimum flow rate: 10 m3/h
Operational flow: 30-80 m3/h
Maximum flow rate: 150 m3/h
Oxygen Input Capacity: 1-9 kg
Hose connection: 32 mm left and / or right
Dimensions: 1285 x 1500 x 470 mm
Weight: 43 kg

Code	Details
OMR.100	Oxydent Membrane Rack

Downloads

OMR.100 assembly

OMR.100 datasheet